Product Features:
Introduction:
The one step HIV test is a rapid test based on the principle of immunoassay combined with conjugated
colloid gold technology. The HIV test (Serum/Plasma) is a diagnostic device to detect the presence of
the anti-HIV in whole blood.
Storage&Stability:
The test kit can be stored at temperatures from 4°C to 30°c in the sealed pouch up to date ofexpiration.
The test kit should be kept away from direct sunlight and moisture. Do not freeze the test kit.
Packing&Shipping:
Packing: Carton
Company Information:
We take part in many medical exhibitions every year!
CE&ISO:
Our Service:
FAQ:
Introduction:
The one step HIV test is a rapid test based on the principle of immunoassay combined with conjugated
colloid gold technology. The HIV test (Serum/Plasma) is a diagnostic device to detect the presence of
the anti-HIV in whole blood.
Storage&Stability:
The test kit can be stored at temperatures from 4°C to 30°c in the sealed pouch up to date ofexpiration.
The test kit should be kept away from direct sunlight and moisture. Do not freeze the test kit.
Specimen Collection: Blood should be collected aseptically into a clean tube without anticoagulants. Separate the serum or plasma from blood as soon as possible to avoid hemolysis. Use clear non-hemolyzed specimens when possible. |
Format | Specimen | Size(mm) |
Strip | Whole Blood/Serum | 2.5,3.0 |
Cassette | Whole Blood/Serum | 3.0,4.0 |
Strip | Serum/Plasma | 2.5,3.0 |
Cassette | Serum/Plasma | 3.0,4.0 |
Test Procedure: | |||||
1. Allow the test kit, specimen, and/or controls to equilibrate to room temperature(15-30°C) prior to testing. | |||||
2. Remove the test kit from the foil pouch and use it as soon as possible. Best results will be obtained if the assay is performed within one hour. | |||||
3. Place the test device on a clean and level surface. Transfer the specimen by a disposable specimen dropper(or a pipette): To use a hold the dropper vertically, draw the specimen up to the fill line as shown in illustration below(approximately 40uL) . Transfer the specimen to the specimen well(S) of the test device and start the timer. Aviod trapping air bubbles in the specimen well (S). | |||||
4. Wait for the red line(s) to appear. The result should be read at 15 minutes. Do not interpret the results after 20 minutes.
|
Packing&Shipping:
Packing: Carton
Company Information:
We take part in many medical exhibitions every year!
CE&ISO:
Our Service:
FAQ: